Chemistry:

Oxidation by Combustion; From 680°C to 1000°C

Detector:

Apollo 9000: Nondispersive Infrared (NDIR), 125 mm cell

Apollo 9000 HS: Nondispersive Infrared (NDIR), 250 mm cell

Analytical Modes:

TOC (NPOC), TC-IC, TC, IC, (POC Optional)

Analytical:

Apollo 9000

Apollo 9000 HS

Range*: 100 ppb to 25,000 ppm  (sample volume and dilution dependent) using only 5 selectable analytical ranges

Range*: 4 ppb to 4,000 ppm (sample volume and dilution dependent) using only 4 selectable analytical ranges

Precision*: Typical 0.05% of full scale or £3% RSD or CV, whichever is greater, over seven replicates.**

Precision*: Typical 0.25% of full scale or £3% RSD or CV, whichever is greater, over seven replicates.**

Injection Volume: Up to 2 mL

Injection Volume: Up to 2 mL

Analysis Time: 1 to 3 minutes, typical

Analysis Time: 1 to 3 minutes, typical

TOC Run Time: 20 minutes per triplicate, typical

TOC Run Time: 20 minutes per triplicate, typical

* Analytical performance is affected by laboratory water, reagent and gas purity, sample container cleanliness, sample matrix, gas regulator cleanliness and precision, and operator skill
** %CV Area, as opposed to %CV and %RSD, calculates precision before blank subtraction. This yields a lower precision measurement, but impacts sensitivity and accuracy.

Liquid Handling:

Syringe pump, 8-port distribution valve; Auto-dilution methods for higher TOC concentrations and difficult matrixes; Auto-rinsing from sample and/or rinse water

Sample Introduction:

Automatic syringe injection; Autosampler; Solids Boat; Manual Syringe

Controller:

PC, Interface through Windows™ (2000, XP); Password Protected

Data Handling:

Automatic and customized Spreadsheet reports transferable to Microsoft™ Excel™; Real-time display of peaks; Automatic outlier deletion; Recalculations with different calibration curves; Recalculations with different blank values.

Calibration:

Multi-point and automatic blank subtraction.

Other Features and Options:

Automatic file management, Automatic shutdown/standby, Exceeds ISO 8245 particulate requirements with optional kit, Flow rate monitoring, Near line monitoring, Preprogrammed Point and click method setup, Priority samples via scheduled interrupt, Programmable Automatic Wakeup, Selectable IC sparge methods, Solids Module, Stirring Option, Text and CD ROM video help. Validation Support Package available, Certification Protocol available.

Principal Applications:

Waste Water, Industrial Waste Effluent, Drinking and Surface Water, Ground Water, Clean-in-Place (CIP) Validation, Sea Water, Brine Solutions

Official Methods:

EPA 415.1, 415.3 and 9060A, Standard Method 5310B, EP 2.2.44, ISO 8245,EN 1484, USP 643 (Chapter 24), ASTM D2579, prENV 13370, AOAC 973.47

Certification:

UL, CSA, and CE; EMC EN 50081-1 and EN 50082-1

Dimensions (Approximate):

16” (40 cm) W x 23” (61 cm) D x 21” (53 cm) H; 110 lb (50 kg) shipping weight

Gas Supply:

Hydrocarbon and CO2 free air with TOC content < 1ppm.  Gas can be supplied from a cylinder or TOC gas generator.  If a TOC gas generator is used, resulting gas must be hydrocarbon, and water free.  To assure clean carrier gas is used we suggest employing a complete Carbon Dioxide(CO2) removal system and hydrocarbon trap (Teledyne-Tekmar part #14-1362-000) between the gas source and analytical instrument.

Gas Pressure:

30 to 35 psi (206.7 to 241.2 kPa)