| |
|
HT3 Firmware Version 1.12.208
Updated: 6/30/06
|
|
 The updates for the new HT3 Firmware include:
|
Change version of Temperature board code to Version 2.0. |
|
Created new lookup table for Temperature from improved equations for RTD’s. |
| |
|
|
| Installation Instructions (zipped file) |
|
1.) |
Click the Zip File link below to download the HT3 Firmware Update |
2.) |
Unzip the file. |
3.) |
Save the file in C:\Program Files\Teledyne Tekmar\VOC TekLink Data\Firmware Updates |
4.) |
Open TekLink and flash the unit while running TekLink. |
5.) |
For more information on "flashing", go to TekLink Help, type in "Flash" and follow the links for flashing. |
| |
|
| Note: Do not change Baud Rate, Parity, or Stop Bits settings unless instructed to do so by Teledyne Tekmar Customer Support. Default settings are: Baud Rate-19200, Parity-None, and Stop Bits-1. |
| |
|
|
| Installation Instructions (firmware) |
|
1.) |
Right click the Download Now (Firmware) link. |
2.) |
Select "Save Target As..." |
3.) |
In the "Save As" prompt, you should see the name of the file (HT3_1.12.208.hsmain.s19) in the "File Name" text box. In the dropdown menu of "Save as type," select "All files." |
4.) |
Save the file (HT3_1.12.208.hsmain.s19) in the default directory (C:\Program Files\Teledyne Tekmar\VOC TekLink Data\Firmware Updates). |
5.) |
Open TekLink and flash the unit while running TekLink. |
6.) |
For more information on "flashing", go to TekLink Help, type in "Flash" and follow the links for flashing. |
| |
|
| Note: Do not change Baud Rate, Parity, or Stop Bits settings unless instructed to do so by Teledyne Tekmar Customer Support. Default settings are: Baud Rate-19200, Parity-None, and Stop Bits-1. |
|
|
|
|
|
Software
Downloads 
